Where is the best place locate the oil pressure line on a early 70's 396 big block. I have tried the lower part of the block near the oil filter and that does not seem to work
Printable View
Where is the best place locate the oil pressure line on a early 70's 396 big block. I have tried the lower part of the block near the oil filter and that does not seem to work
there is two ports the 1/8 npt that is not drilled thru some times. the one over the oil filter is the one you want can be 3/8 or 1/2 npt this one is the one to use
You have located the right place. But just check your oil pipe. May be some there are blockage in the pipeline.