Thread: 396/402 build

Tweet

just cut the deck used what head you want the iron head s can be cut as well .on the first build i would just take off what you need to get close to o deck .the piston should not be in the hole by .033 .you need real numbers so you need to know that it is if bored it very well could have been deck to . same with heads cutting .033 you could be + piston out of the deck by 008/010 or so with the deck with the pistons hanging out of the deck that not a good way to go with a 039 head gasket you would be less then 030 room with piston rock that getting very close to hitting the heads with the pistons