Thread: Intake R&R
Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
03-11-2009 05:59 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
wipe with thinner till dry and i put a 1/8 or so bead on the intake and a 1/4 to 5/16 bead on the block then it sealed take your finger wet it and just wipe the inside the dist hole just a wee bit when the intake is down so the dist will not get in the way of the rvt . just hit the threads with a small amount of rtv to hold down any oil wicking thru the bolts .i have the snap on built in tq wrench arm start in the center work your way out in two steps then get it hot and give them a 1/4 turn should be 15 or so i stop when my arm clicks on the bbc main bolts my back go s out them i know there at 110 for bolts
Last edited by pat mccarthy; 03-11-2009 at 06:03 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year