Thread: Solid Rollers on the Street...

Tweet

what oil are you using ? your cam is not that big i have used so many solid rollers over the 20 years on the street some in the 700 lift i have used the crane rollers lifters over the years i been lucky some day my luck will run out . i have pulled the worn out ones before they did any thing. i have rebuilt engines were they were not so lucky were the rollers and lifter pins were siting in the oil pan i have used the 1.625 iskyloy springs in both cars and other customers engines have used this spring many times it 240 @2.000 and well over 650 they work fine i know i have over 1000 miles on the blown 548 in the 50 chevy with crane rollers and the isky springs and 712 lift crane cam the the other engine were in the 680 lift and used crane lifters i have crower hippo that will be going in when i go thru the engine the gto has a 740 lift cam with the same springs and lifters you could look at the new isky red zone ez roller lifters with no needles bearing in the roller