intake bulldog you can get from m.t.s. the heads are stock small chambers after porting 78cc. the flow was 319@.700 and 268@.700. rocker are full roller setup from m.t.s. the spring setup is 150# on the seat and 400# open. the lifters are sbc soild's with the .012oiling hole. the pushrods are .080 wall 10.200 lenght. cam is a custom soild spec'ed by me .630 lift and 258 264@.050. the rods are from scat full floating 7" long. the pistons are bbc .070 over that are .020 for the caddy. the block need to be decked .020 to 0 deck with the chevy pistons. the valve reliefs need to be cut for the caddy. i called probe and they pulled the pistons before the chevy intake valve relief was cut into them.. alot less cash then custom pistons.. rings are just bbc totalseal tnt's for running nos. the crank is stock with .125 radieus on all the rod journals and cryo treated and reheat treated..the race pan and pump and pickup are all from m.t.s.