Thread: Failed LS7 4 times
Results 1 to 9 of 9
LinkBack URL
About LinkBacksThreaded View
-
07-04-2007 02:05 AM #9
CHR Member
- Join Date
- Jun 2007
- Location
- sydney Australia
- Car Year, Make, Model: 57 Chev
- Posts
- 10
I would like to buy a motor from Eric, but it would cost about 35k to get on my front door. I live on the other side of the world from most of you guys. The old LS7 is going to make a nice coffee table for my living room. Only has 30 thou over bore, standard MSD dizzy and mains were down to 30 thou under size, due to the 3 rebuilds.It always had 65 to 70 psi untill the bearings got chopped out. I dont know if it was to tight by feel. I used to turn it over with a breaker bar alright. I was only curious as to why it kept failing. Im thinking maybe a casting problem in one of the galleries.Last edited by Flatblack 57; 07-04-2007 at 02:11 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I bought the 76 in August , but haven't been able to work on it. When I get a chance I'll post some pictures.
Corvette Resurrection?