Thread: Camshaft advice (again...)
Results 1 to 15 of 32
LinkBack URL
About LinkBacksThreaded View
-
04-04-2007 07:29 AM #1
CHR Member
- Join Date
- Jul 2006
- Location
- Glastonbury
- Posts
- 371
Camshaft advice (again...)
I have a stock 1984 454 oval port. Standard trans 4 speed (with OD) and a 3.08 rear end.
Parts ready to go onto this motor are:
1)Edelbrock performer 2.0 dual plane intake
2)Edelbrock 750 carb (1411)
3)Headers
I am looking at this cam:
Melling 22214 camshaft - Duration at .050, Int. 214, Exh. 214, Adv. duration Int. 292, Exh. 292. Valve lift Int. .502. Exh. .502, Center lobe Int. 109 Exh. 119. Characteristics-class 11-may not be computer compatible. Fair idle, good low to mid-range torque. Power range 1700-5200 RPM-HYD.
Look ok? I am just looking to freshen this engine up a bit. Street driven with the occassional holeshot or test and tune run at the track. I am thinking 5500 rpm max..? How are Melling cams and lifters?
Any advice would be great. thx guysLast edited by Gusaroo; 04-04-2007 at 07:44 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This popped up on Facebook, one of those "Do you mean for the last 40 years..." moments. A drop dead easy and accurate way to check Toe In! -
Toe Adjustment