Thread: 454 boat motor ?
-
01-05-2007 07:36 PM #1
454 boat motor ?
I have a chance to pick up a crusader 454 350 hp motor but not sure if its rev rotation if so can I just change the cam to bring it back to std rotation or are there other things to look out forthere is no substitute for horsepower
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-05-2007 07:39 PM #2
yes the rear main seal and check it over good
-
01-05-2007 07:48 PM #3
I had already planned on a basic rebuild (bearings and gaskets )but what about the rear main sealthere is no substitute for horsepower
-
01-05-2007 07:54 PM #4
the seal will rope the oil out if you do not get one for std rotation look at a seal you will se this ///////// on the lip inside of the seal it would not the same \\\\\\\\\\
-
01-05-2007 08:02 PM #5
cool thanks Pat this turned into a quick project since my daily driver blew up I guess 6.2 diesel dont run too well with half their inards in the oil pan lol so this motor going in it and trying to do it cheapthere is no substitute for horsepower
I haven't been enjoying the ride quality, it's very firm. At first I thought springs but they should actually be light because they were meant to be used with factory air shocks. Figured it must be...
Stude M5 build