hey guys...

sorry i didnt speculate on what im putting this motor in...
its going into my 68 camaro and im looking to get around 500FWHP or so out of it...

the shortblock is the vortec series truck engine and I was going to change out the pistons and cam so i can get the performance of a pass. car shortblock but with the strength of the truck engine...

so, in that case...i wanted to bump the CR to around 9-10.1 and use that cam i originally specified...

will that cam be too much for the fuel injection setup?? ive seen that cam in a ram jet 502 that made almost 600 HP so i thought that it would work well...