Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: intake spacer kit and distributor angle
          
   
   

Results 1 to 9 of 9

Threaded View

  1. 01-02-2006 11:47 PM #8
    76GMC1500
    76GMC1500 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2003
    Posts
    1,176

    The distributor does not sit on the centerline of the engine, it sits off to the side so it engages the cam vertically. The distributor is vertical in the block and raising it will not change the angle. Even if the distributor engaged the cam at an angle, it doesn't matter what angle. The gear is round, therefore, the same from any angle.
    Last edited by 76GMC1500; 01-02-2006 at 11:50 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink