-
11-20-2005 05:26 PM #1
Timing chain sprocket gear clearance
I have a double roller timing chain, and iam using the stock timing cover. Sense i don't have the intake on and i can see into the cover and even when i feel the chain it dont seem like i have alot of room, it seems like the gear will hit the cover. Should i buy a different cover or will this one be fine.
Thanks
Mike1985 IROC BB438
1995 SATURN SC2
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-20-2005 06:38 PM #2
i have never seen a big block chain set hit the front cover. BUT is it a gm cover or made in china? if it is a old mark 4 engines with a GM cover you should be fine but if looks that close check it any thing that is .040 or more it will be fine
-
11-20-2005 06:47 PM #3
Ya it is the stock GM cover. The block is a pre 80 454 block.1985 IROC BB438
1995 SATURN SC2
-
11-20-2005 07:09 PM #4
Originally posted by Duke901
Ya it is the stock GM cover. The block is a pre 80 454 block.
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Good to have her home finally, still need to go back and give her another polish after messing with the engine stuff. Made it up to Idaho. Also a local show.
New guy from Utah.