Originally posted by techinspector1
I see a mismatch here. In your opening statement, you say you want to turn the motor 6,000-6,500 rpm's. The cam you plan to use will make power from about 4,700-8,000 rpm's with minimum 12.25:1 static compression ratio.

Your 0.060" over block with 50 cc pistons, 119 cc heads and 9 cc gaskets with zero deck will make 12.65:1 static c.r.
yes the cam is big it will need very hi stall on the converters. is this what you want? all this will work .have done it. but this is not a daily driver .the O ports will work but they will need some work and the cast crank will work i have used them .