Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Sorry .. There is another Question
          
   
   

Reply To Thread
Results 1 to 2 of 2
  1. #1
    $200deal! is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Cranbrook
    Posts
    7

    Sorry .. There is another Question

     



    I also got a BDS 8-71 Blower.

    What should I check to make sure its still good. It turns fine. Should I measure the end clearance of the rotors to or freeplay or ? What is the standard for " good " to " bad" clearence ?

    Thanx
    J

  2. #2
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    if it looks good no dents or nicks in the rotors or were they run in side the case i would not open it up it is good to go or send it in to bds and have it check out

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink