you are not right?? a 5 .00 stroke ??first thing you do not have enough block the rods will not fit in the block you will cut the oil pan rails out and hit the main oil gaily and then you will have junk the oil pump will not fit in the block. the cam will hit the rods .and why would you go to 5.00 stroke with a 4.310 bore??do you know how much this cost $ 2500to 3000. for the crank and you need a long rodswith small, block rod size $1700 or titanium$$ so you do not cut the hell out the block and if you are lucky the cam will fit ?? you need small base circle cam$300.+ and a set of custom pistons you need to get 9 so if you hammer one you have a back up if you smoke one it at one time cost 400 for just one for the set up. custom set of pistons $1200 or more and you will have to make or buy a oil pan and do not forget THE MALLORY METAL HANG ON TO YOUR ASS ONE BIG BLOCK I HAD THE COST $$1000 TO GET IT BALANCED THE 5.00 STROKE IS NOT MADE FOR THE 10.200 BLOCK THE PISTONS WILL COME OUT OF THE BOTTOM OF THE BORES if this would fit and it will not the rod angle will be crap the 525 is the best way to go with the small bore