One thing that I am very thankful for is the advice on glue that my local interior guy gave me when I was getting ready to start working on panels, etc. I mentioned 3M General Trim Adhesive to him, and he told me that I needed a stronger glue, and even offered to sell it to me from his bulk supply. I took in a 1 gallon jug, and he filled it with glue, and then showed me his old siphon spray gun hanging by the work table. It has glue in it 24/7, and very seldom plugs - if it does it's a simple matter to blow it out with a blast of air, and back in business. To do the inside panels and trunk I used 2.5 gallons of this stuff at $26/gallon, and I figure I would have dropped at least $350 had I used rattle cans.
Attachment 49391