as long as you have the v 8 bell and you change the output shaft it will work however it might shift different because of the calibration in the vavlebody for the camaro to the jeep ,. either way it will work. another concern is you need to address what spline input shaft you have ,if you plan on reusing the converter from the jeep . your camaro trans is a 84 so it should be a non aux. 27 spline. unit. the late 85 up are 30 spline so it may not work depending on what year it is. what year is the other unit?

when you get the unit in you will also have to get lockup to work untill i know what year the other unit is or how you have it run know i cant help you with that yet.