Thread: turbo 400 yoke
Hybrid View
-
11-13-2009 09:04 AM #1
turbo 400 yoke
I know this question has probably been asked a 100 times before but I couldn't find a search for this site. I'm have a turbo 400 with a fixed yoke, can I take the bolt out and use it as a slip yoke with a one piece drive shaft? How long can you make a drive shaft before you need to split it?Thanks
-
11-13-2009 12:31 PM #2
Yoke drive 400
I don't think you can do that but I wouldn't bet my life on it....I remember when hot rods were all home made.
-
11-14-2009 10:31 AM #3
Hi,
The bolt in yoke has no plug in the rear nearest the u-joint. The bolt in yoke will leak lots of oil. I sell the correct T-400 yoke if you still need it. What u-joint size do you have.Mike Forte
Forte's Parts Connection
40 Pearl St
Framingham, Ma 01702
mike@fortesparts.com
fortesparts.com
Tremec Elite Distributor of T-5, T-56, T-56 Magnum, TKO-500 & TKO-600
30th year in business
-
11-16-2009 07:11 AM #4
I'll have to measure it or is there some other way to tell what size it is? Thanks
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy