Tremec TKO bits & pieces

I am fitting a Tremec TKO 600RR (0.83 5th) to my 68 Iso Grifo 7 Liter. This is repalcing the 4-speed Muncie M-21 it currently has. I have 3.31 axle and tyre size is 225/70VR x 15. Can anyone tell me what speedo gear I will need in the Tremec (it is a mechanical-drive speedo)?

Also, where can I buy the McLeod - or is it Hurst now? - shifter that has a lower profile than the standard Tremec shifter? I believe there a number of different offset stubs you can get to alter shifter placement? Won't know what offset side to side and fore and aft until I get the two boxes side by side on the floor.

Thanks,
Chris

Mike Forte is one of the advertisers here, will be able to answer all your questions. If you don't hear from him you might want to email him, he'll get back to you....

Thanks Dave,
I hope he'll read this sometime.
Chris

Hi Chris,
I have several parts the your Iso Grifo will need. The shifter requires machining of your tailshaft housing. Do you have the 31 spline strap yoke & GM to TKO speedo adapter?
I've sold many TKO's to Iso Grifo owners. Nice car....

Thanks, Mike.
I'll phone you sometime soon. I think the shifter you are referring to is the one especially for Corvettes that puts the lever exactly the same place? I already have my TKO so can't go that route very easily, I guess. I was thinking of the Pro5.0 shifter, which looks lower that the Temec one. I would then decide on the correct offset stub to get the lever where I want it. My car already has a Hurst aftermarket shifter on it, so the lever isn't in the stock position anyway.
Anyway, I'll talk to you about it. Glad you even know what a Grifo is, let alone like them!
Cheers,
Chris