How a transbrake works.

I just wanted to post this up just for future reference, credits go to Wikipedia.

In drag racing, a transbrake is a setup installed in automatic transmissions which selectively places the transmission in first and reverse gears simultaneously, effectively holding the race car stationary as if the foot brake was applied. The transbrake is activated by the driver by applying electrical current to a solenoid at the transmission. With the transbrake engaged (transmission locked), the engine throttle can be increased to any position (opening) in preparation for launch without the race driver worrying about the car creeping forward. Milliseconds before the green light illuminates on the Tree the transbrake is released (by the driver releasing an electrical switch or by a delay box "timing out" originally triggered by the driver releasing an electrical switch) and the car launches forward, its engine already in the higher power band and the transmission already in low gear. It was invented by Steve Griner in the year 1977