Just picked up a bellhousing and it did not come with a fork. Will a stock fork work or does it take a special Lakewood one? Is the pivot for the fork a special part also? I am putting this behind a 428.
Printable View
Just picked up a bellhousing and it did not come with a fork. Will a stock fork work or does it take a special Lakewood one? Is the pivot for the fork a special part also? I am putting this behind a 428.
It should work. I have a Lakewood and everyone tells me A stock fork
will work in my 57 chev..The pivot ball should also work..You can buy
adjustable Pivot ball also....Make sure your linkage is set up correctly.
rdobbs
Hi Fordz,
The Lakewood bellhousing can use a stock fork as long as it's the correct one for your application. You will need to countersing the back side of the bellhousing for the flat-head screws needed to attach the Ford fork pivot.
If you need any of the parts I have all of them in stock.
What tranny are you going to use? If you have any questions feel free to call me at work 508 875 0016.