Thread: Is my Torque Converter on right???

Tweet

....Thanks Pat, ok so somethings not right. My transmission adapter is 3/4" thick, I can't measure the flex plate adapter exactly w/out taking it off cuz it's bolted on the engine but there's no way is 3/4" thick. And my torque converter must not be all the way on either. If I turn the tq. converter should the driveshaft also turn? . My worry is that I have the wrong crank hub spacer & it's not thick enough. If I knew that the crank spacer was right then I'd know if the tq. converter was on right... Think I'll take a nap & then tackle it again! Thanks again, Bill

Thanks Daffy, hummm I'm just concerned that it's not the right hub spacer. The first transmission adapter that they sent me was the wrong one, then the flex plate & hub spacer were not drilled to the correct diameter so in turn the bolts they sent were the wrong ones {I just drilled it out & bought new bolts}. So when I wasn't sure about if the tq. converter was on right or not it got me thinking; Is the hub spacer the correct one? Thanks again, Bill