Quote Originally Posted by stovens
Any recommendations for tranny lines? I'm getting ready to install the 460 with the c6, and was wondering what to use and how to secure them. The old lines were thin rubber hose and were just hanging down when I go the truck. Thanks.
"Assuming" you are using the radiator cooler, just run some 5/16 line from the trans to the frame rail to just in front of the engine. Put some rubber or braided steel(for appearance) hose as a vibration damper on each end and you are done. The original (OEM) was bracketed to pan bolts (at least the three F250/350's I had were), and if you go that way instead of along the frame rail, then you only need the flex at the radiato r.

The 5/16 is auto parts store brake line stuff and is in up to 6' lengths