Thread: th375 info
-
11-02-2008 08:25 AM #1
th375 info
I wouldn't mind if some of you folks could throw me some good info on the th375. Ive been told its basically the same as a th 400, but will bolt-in-place of a th350. Is this true? Is it a good transmission??
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-02-2008 09:36 AM #2
It is a lighter duty version of the TH400. On most of the units the differences are found to be a lighter duty sprag & less amount of clutches. It can be built just like a TH400 because of the parts interchange. It is usually found to have the lnger tailshaft and it shares the TH350 yoke. So depending on your 350, it can easily be adapted. TH350's had short and long shaft options. Do a bit of measuring and see what has to move if anything.What if the "Hokey Pokey" is what it's really all about?
-
11-02-2008 09:39 AM #3
i have the long tail 350, about 9 inches? I keep burning out 350s even with hi-performace clutches and all so im hoping this will end that
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project