Thread: 700 r4 problem...
-
06-27-2007 12:29 AM #1
700 r4 problem...
hey guys I need some help. I have a 700 r4 and it seems like i blew first gear. the truck just starts off in second and drives normally after that (with a little rattle). can you help diagnose what happened? what should i do?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-27-2007 03:34 AM #2
most likely the govenor is stuck round cover near back of trans remove gov. hold the gear and let the gov. hang down push the wheights in and out. the shaft inside should move. if it sticks remove the gear a roll pin holds it in place. after the gear is out remove the inner shaft.clean with brake clean or carb clean reinstall make sure it moves free. when istalling the gear make sure the hole for the roll pin lines up you may need to turn the gear 180 degrees. You may want to drop the pan if its full of metal its time for a rebuild
You likely have to have FaceBook to view, but friend and CHR guy Randy Ross received one of the AMD3 awards for his truck. How cool!! https://www.facebook.com/reel/1116840126282422
R2's F100 at Pigeon Forge F100...