Thread: TH 400 problems
Results 1 to 4 of 4
Threaded View
-
04-29-2007 07:19 AM #1
TH 400 problems
On the inside of the case at the rear there are bumps that hold the snap ring in place between 1st and 2nd gear. Well I sheared them off. Is this due to the added power and or Trans brake or an improper trans build?
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build