Clutch Master ???? T56 6 Speed

I am putting a T56 in my 37 and need to find a universal Master cylinder that will work with a T56 and the original slave cylinder. I need a master with a reservoir, not remote as was with the stock master. This is my first manual install in a streetrod so im a little green in this area. Do I need to consider stroke and bore or?????? any help would be great. Thanks Ryan

Tilton makes a very nice unit and fairly priced, almost every circle track car in the country use these,if that gives you an indication of the quality.
I would think you would want a 1 inch bore,but I don't think you get any choice on the stroke but there is plenty. I'd call Speedway Motors and talk to them about specifics....