trying to find out what the first gear ratio is on a 72 chevy 350 turbo trans, so i can figure out how much tourque the axles can handle
Printable View
trying to find out what the first gear ratio is on a 72 chevy 350 turbo trans, so i can figure out how much tourque the axles can handle
thanks denny, how you been?
the reason i ask is i just got my sellement for the accident i was in on feb. not a whole lot ,but i want to strengthen up my 7.5 rear in the camaro. i have a richmond mini spool and cross pin moser makes heavy duty axles and c clip eliminators for it. i ran the spool on the street to a couple shows and it wasnt all that bad. only when you would make a 90 degree turn it would cost me about 550.00 .the other option i have is buy a posi unit. do i still need the axles and eliminators
is this right
420ft.lbs[torque
x2.52[first gear
x3.42[rear gear
x.90[efficiency
=3257 ft lbs. of torque