Thread: Need Help On Chevy Bellhousing
Results 1 to 15 of 19
Threaded View
-
04-22-2006 07:55 AM #1
Need Help On Chevy Bellhousing
I posted this question awhile ago, and didn't get an answer. I'm starting to watch Ebay for the bellhousing I need to mate the '99 Vortec 350 to the '64-'67 Chevy Nova trans I have coming. I haven't played with a Chevy for many years, so I don't have a clue what to look for.
I assume all the Chevy SB have the same bolt pattern, but my question is about the bolt pattern and bearing carrier cut-out size on the backside of the bellhousing. I see some on ebay that are like 4 and something inches and some are 5 and something inches. It looks to me like the 5 inch ones might be for a truck trans??
Also, some are showing 10.5 clutches and some are 11 inch. Is there a different tooth count flywheel I should be looking for?
I always thought Chevy small block was Chevy small block, but now I'm confused. Any help you Chevy guys can provide will be appreciated.
Thanks,
Don
I've used both X and H pipes on some builds and really the only thing that was noticeable was the change in exhaust sound.....I tend to agree with Rodger that any benefit you'd actually see/feel is...
Exhsust system