-
10-12-2003 01:00 PM #1
Turbo 400
Anybody know waht size plug goes on the left side right above the linkage hook-up?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-12-2003 02:35 PM #2
Turb0 400
Really don't know. Had it rebuilt recently - took it out for a run the other night - ran great for about a mile - I turn it around heading for the house and it got sluggish - coasted aways and well towed it home - thought I had blown the gasket - replaced it and I should have known better -the way it was running out - found a hole above the pan - looked like fine thread but it is a area that is hard to reach - tried a - I believe 1/4 plug- pipe - fine thread - the threads took for a-bit - didn't want to torque it much - as I didn't want to mees up the threads.
-
10-12-2003 05:45 PM #3
Yea well - thanks - "Streets" - I yanked it myself - etc.. not really an option at this time - unless - I'm going to do 'all' again - I'll call him this week - thought I might find a "quick fix" here - Thanks though
TJ
-
10-12-2003 05:51 PM #4
If it ran dry it could be damaged. I agree-take it to the rebuilder.
Abe
-
10-12-2003 06:23 PM #5
It didn't run completely dry. Although - I didn't think of this option - what would be damaged - the pump? As it loss it's 'drive' I pretty much coasted - whole night 'out' wasn't over 15-20 minutes and no more then 50 mph- very short duration - wasn't over 4 miles -- ?? Of course - what U don't know - U don't know -- U don't know!
-
10-12-2003 06:38 PM #6
Didn't mean to get 'smart' or anything - sorry 'bout the lack of info. - I initially thought all turbo 400 cases had this plug - and actually my next question was what it was for? Maybe this case was set - up for ?? something else - the case is beefed up around this hole and it looked like a standard 'stamp' of the case - at any rate - I will talk with the rebuilder tomorrow - thanks for the suggestions - I really do - appreciate it. Another case - of thinking there was a simple solution.
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel