Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 94 T-Bird Tranny revisited
          
   
   

Results 1 to 2 of 2

Threaded View

  1. #1
    kcress's Avatar
    kcress is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Santa Cruz
    Posts
    193

    Denny? Thunderbucket?

     



    Hey Thunderbucket, Denny, or anyone else in the know.. I finally got the T-Bird up on ramps.. Man that was hard.. Took about 2 hours!! It just shoves the ramps away and if you somehow make it 90% up them they spit out like a watermellon seed.. scary!


    I drilled the tranny pan to drain it (will TIG the hole).

    Dained alot.

    I pulled the filter.
    More draining.

    I pulled the 62 bolts out to drop the valve body and separator plate.

    More draining.

    And was surprized to see gaskets on both sides of the separator plate!! Didn't remember that there were any here.

    More draining.

    My question: Can I reuse these gaskets if they look okay? Or is this a BIG no, no. I was surprised to see that the service manual I have, said DO NOT replace the pan filter or the pan gasket if they aren't actually damaged.... (manual sez nuttin about the separator gasket tho)

    Waddah yah think?
    Last edited by kcress; 04-17-2005 at 05:49 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink