Thread: 400 turbo screw up

Tweet

Originally posted by Big Daddy T
OK guys I screwed up. I am for the most part a good mechanic. I reasently put a shift kit in my elcamino. ( on the ground / in the cold ) some how i goofed . It works perfect but if you rev the motor hard it pukes tranny fluid out the dip stick tube. Can any one tell me where I goofed or where to look first? Any info will be greatly app. T Y Tim

your breather pipe is eather stoped up, you trans fluid is boiling over, or the filter is restricked some how. the case has a breathes on top, should be open, make sure you cooler lines are not to close to the pipes and then pull the pan back down and be sure the filter in in the hole and not stopped up. its one of the three. check the filter close. if you had a pressure that bad in the pan the trans wouldnt work.

ps sounds like the filter is sitting on the bottom of the pan.