Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 3 speed Transmision for 1964 chevy 327
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    deltahomer's Avatar
    deltahomer is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2004
    Location
    Cape Canaveral
    Car Year, Make, Model: 56 Chevy 210
    Posts
    64

    3 speed Transmision for 1964 chevy 327

     



    This one is a tough one people. Need to bolt a 700r4 or th350 to a 1964 327 chevy engine. Do I need an adaptor for the starter. How about a flex plate. Currently I am running a 56 cast iron powerglide and the engine already has an adaptor installed. I don't know if the powerglide bolt pattern matches the trannys I am looking at.

  2. #2
    shawnlee28's Avatar
    shawnlee28 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    so.cal
    Car Year, Make, Model: 66 c 10 fleetside longbed
    Posts
    1,942

    Not 100 percent shure here but I think 56 to 86 was the same bolt pattern on a chebby small block,but dont bet the farm on this info.
    Its gunna take longer than u thought and its gunna cost more too(plan ahead!)

  3. #3
    Sgrinder's Avatar
    Sgrinder is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    USA
    Car Year, Make, Model: 64 Impala SS, 82 f100
    Posts
    17

    Doing the same with a 283, but had the aluminum PG. Bought the ShiftWorks conversion kit to keep the original console shifter for use with a cable hookup. Its slick. Everything bolts right up. Might have to do a mod on the trans crossmember. Weather turned cold so don't have it all in yet.
    DO have a question tho. The kickdown rod sticking out of a hole in the trans case hangs out about 3/4". This prevents the kickdown cable from seating against the case and sealing the hole. Why? Naw, Streets, that aint in the book.
    Don't have a clue and proud of it.
    Older is better.

  4. #4
    four webers's Avatar
    four webers is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    spring city
    Car Year, Make, Model: 82 vette
    Posts
    38

    If you plan to install a 700r 168 tooth you can use a starter from an 82 vette and lokar has a nice tv cable setup for the 700 also .

    geo
    4 dcoe 's on moon crossram afr , msd , tko , haltech , hydroboost , etc

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink