Thread: 15x7 smoothies with whitewalls
-
11-12-2004 12:26 AM #1
15x7 smoothies with whitewalls
5 on 5 lug pattern
15x 7
3.75 off set
will this wheel fit on my 89 fullsize gmc. i need it too tuck up under the fender.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-12-2004 12:42 AM #2
it wont fit because gm bolt pattern is 5 on 4 & 3/4's ....scooter
-
11-12-2004 10:13 AM #3
Are you sure? I know that the 1/2 ton 5 lug from '71 to'87 was 5 on 5. I'm building a '69 short stepside right now with '72 front discs and rear axle. My son is using one of my '72 wheels for a spare on his '91 also and we test fit it before throwing it on the spare tire mount.Originally posted by gassersrule_196
it wont fit because gm bolt pattern is 5 on 4 & 3/4's ....scooter
The aftermarket wheel companies build Corvette rallys on a 5 on 5 so you can put them on your Chevy trucks. The stock truck rallys in either 7 or 8 inch width were 4 inch backspacing so you should not have any inside clearance problems with those 3 3/4 inch back spacing wheels.
TomLast edited by 39Deluxe; 11-12-2004 at 10:18 AM.
-
11-12-2004 08:36 PM #4
my bad it is 5 on 5 so it would work sorry
-
11-13-2004 01:17 AM #5
I figured you were just thinking cars. I did that all the time too until I got a truck.
Tom





LinkBack URL
About LinkBacks
Reply With Quote
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build