Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes
  • 3 Post By Scooting
  • 1 Post By techinspector1

Thread: Front sus
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    55mike is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Feb 2018
    Location
    Moresville
    Posts
    1

    Front sus

     



    Has anyone tried to install a mus.2 suspension on a 55 tbird?

  2. #2
    Scooting's Avatar
    Scooting is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    Rio Rancho
    Car Year, Make, Model: 1940 Ford Sedan
    Posts
    537

    First in Quality and Strength is Fat Man Fabrications. Contact Brent (owner) with your inquiry. If he doesn't have it, he may do one for you anyway. Years ago I sent him drawings of my 1936 Hupmobile frame and he did his first ever kit for the Hupp. When I got his kit, it was a perfect fit and simple to install. I think it was 6 inches wider than normal but fit like a glove. Still working great today.

    There may be a reason not to put a Mustang II on some cars, so call and talk to Fat Man about that. They will only do one if it is an improvement.

    Good Luck with your project.
    NTFDAY, rspears and 40FordDeluxe like this.

  3. #3
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    If you could find a Mustang II complete system in a boneyard and re-purpose it under your Thunderbird, I would say go for it. The front track on your 'Bird is 56 inches, the front track on an MII is 55.6 inches, so it is very close.

    Problem is that there are probably none to be had in a boneyard any more due to the popularity of the system, so you would have to go to the aftermarket. Problem with the aftermarket is that they have re-designed the system to eliminate the strut rod (and it was such a beautiful design) that was part of the original factory design. The aftermarket makes a lower control arm WITHOUT the strut rod, that is too narrow front to rear to absorb forces introduced into the lower arm and they fold up. Famed automotive journalist Pat Ganahl has stated that he sees a couple of hundred failed front suspension systems on hot rods every year when he attends rod runs. The old engineering motto states "Form follows function", but it seems that some of the fellows who build aftermarket systems don't adhere to that.....or they don't understand it.

    Now, if you can find an aftermarket manufacturer who will build you a system utilizing a strut rod and engineered just like the factory MII system, go for it. It'll likely work just fine for the rest of your life.

    Here's an example of a system that has been mis-engineered to eliminate the strut rod....
    http://cdn3.volusion.com/mkkrn.vcpjk...jpg?1344517696

    Here's another example of mis-engineering from an aftermarket supplier. See how narrow the attachment points are on the lower arms. They simply will not supply enough strength to resist folding up when you encounter an obstruction.
    http://www.autoworksparts.com/mustan33.jpg

    Here's a re-engineered MII system from another aftermarket supplier who understands the forces involved.
    http://new.martzchassis.net/wp-conte.../falconfr2.jpg
    Can you see how wide the control arm attachment points are apart on the bottom arms, compared to the photo shown on the above link? This system was manufactured by Martz Chassis. Why don't you give them a call and see if they can supply an MII system with stock MII spindles and front steer for your 'Bird ? This photo shows a system with a rear steer spindle, not what you would want necessarily, particularly if they have used MII spindles and reversed them.....
    Contact Us – Martz Chassis

    Tell 'em that the guys from Club Hot Rod recommended them.

    Finally found a bone stock MII system. You can see the strut rod that bolts to the bottom control arm and extends back to a rubber socket on the frame. it is the diagonal piece in the photo on the passenger side of the suspension.
    http://photobucket.com/gallery/user/...My5qcGc=/?ref=
    On the driver's side of the photo, you can see the back part of the strut rod terminating in a set of rubber biscuits that are held in place by a metal fixture that extends down from the bottom of the frame rail.

    We would really appreciate it if you would come back and tell us what you found out. Thanks.....
    .
    Last edited by techinspector1; 02-14-2018 at 04:04 PM.
    NTFDAY likes this.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  4. #4
    Matthyj's Avatar
    Matthyj is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2014
    Location
    Clinton
    Car Year, Make, Model: '32 Ford Hi Boy, '37 wildrod sedan
    Posts
    561

    Tech, Good points but I took the advice of an expert on another forum and throw that lower a-arm attachment point in double shear with an additional bracket and I believe the problem is cured, the problem is most kits don't do that. I prefer the tubular a arms for every reason, one being looks which to me is important (Hey its a streetrod)
    I sent the wrong pic and cant remove it! You cant see the lower bracket at the back in this photo! Sorry
    Attached Images
    Last edited by Matthyj; 02-14-2018 at 05:40 PM.
    Why is mine so big and yours so small, Chrysler FirePower

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink