Hello, I have a question about stock 74 and up pinto crossmember. I narrowed mine 7 1/2" and when I put it back together, using some of what I cut off inside half ways into one end, so I could be sure everything was lined up and level. I also have a 3 hole rack that is narrowed the same amount and all 3 bolts fit good when I put it all together, the top hats aren't flat where the slotted holes are, but are angled downwards 5 degrees and the shock tower are at 15 degrees. My question is, is going to be a problem to align the front end? I'm also using 1" narrowed a arms too. Thanks.