Thread: Cross member from 95 Roadmaster in 1937

Tweet

Originally Posted by Mutt's37Buick

I would not be able to use the 95 steer box because it normally resides where the 37 frame passes through and supports the front bumper.

You're making this more difficult than it needs to be. DO NOT mix and match steering components. Use everything from the '95 and bridge over or under the steering box with a "U" (or upside down "U" or lateral "U") of 1 1/2" x 3" or 2" x 3" or 2" x 4" or whatever material closely matches the frame dimensions at that point, to connect the rear and front parts of the '37 frame.

Originally Posted by Mutt's37Buick

Will it work for me to cut rectangular slots half way up from the bottom of the 37 frame and half way down from top of the 95 cross member so it can be slid up into the frame?
I could then have the cross member welded to the frame.
Thanks

Again, seems like you're trying to make this more difficult than it is, but yeah, that'll work.
x
x