Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree9Likes

Thread: 73 charger squirrley steering
          
   
   

Reply To Thread
Page 1 of 5 1 2 3 4 5 LastLast
Results 1 to 15 of 75
  1. #1
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    73 charger squirrley steering

     



    Hi.

    Just replaced the entire drivetrain in my 73 charger.

    The alignment has been checked twice, but it doesn't track right. It doesn't like to drive straight: kind of like trying to drive on the middle of a crested road, it will try to lean left then right when trying to go straight. Then it seems to have both understeer and oversteer.

    Here is my question: the replacement springs have three inches of extra lift, is that enough to be causing this?

    I seem to remember a similar problem with my 89 diplomat. The shop doing the alignment said they found that those torque bar suspensions required a ' special tool'. After they got it, the diplomat tracked straight as an arrow.

    Any thoughts?
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  2. #2
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    What do you have on it for tires and wheels??

    and can you list the specs of the alignment??(if they gave them to you)

  3. #3
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    first, it's the rear springs with the extra lift, forgot to specify that

    running stock 15" wheels and tires.

    Don't have any specs.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  4. #4
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    3 inches of lift at the rear will remove 2-3 degrees of castor at the front causing the symtons you describe

    did you also do bigger rear tires on the rear?? reason for the lift??

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,334

    I would take a look at the steering box. The 75 Duster I used to have did the same thing, wander all over the road, and the guy that did the alignment told me that the box needed rebuilt but he wouldn't guarantee it to last more than a couple of years and he'd been in the business for some 40 years. I looked in a few junkyards for one and couldn't find one and I don't think it was because they were so popular. I had intentions of changing it to r&p, but sold the car before hand.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Reason for lift, just for the look. The steering box is new.

    I may need to go back to stock springs.

    If that is the issue, then loading it down with three or four men in the back should make the problem disappear? ( a cheap check )
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  7. #7
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    As I recall the torque bars are adjusted at there rear with a deep well socket.
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  8. #8
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Do you have the alignment specs for the car AND WHAT THE ALIGNMENT GUY HAS IT SET AT????????

    Usually a little more caster will solve what you describe

  9. #9
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    No sir, I don't have the specs.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  10. #10
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,989

    Any good front end shop would give you both the OEM specs and their settings, if asked. As a former owner of a '71 Charger I cannot imagine that jacking up the back end three inches would result in a "good" stance for the car. Those are some good looking, coke bottle shapes, and not too many left around. That said, it's your car......
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  11. #11
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    also please define what you mean by lean??

  12. #12
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    By 'lean' I meant that the car just doesn't seem to like to drive straight. It prefers to wander. Today I took it on the interstate for the first time. It is downright scary! Takes complete attention to make it track straight, just isn't safe over 55. Feels like I'm dead sober, driving a drunk car. Loosing camber makes sense, except isn't camber adjustable?

    I always thought it took a radical rake to get this much misalignment.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  13. #13
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Also, thanks for reminding me it's my car; implying it's mine to do with as I like. Having dumped 20 large in this bucket to save it from the scrap yard, it's refreshing to hear.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  14. #14
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I said CASTER, not camber

    Another thing that will cause dartiness is a ball joint that is seized or seizing up and doesn't let the wheels turn smoothly, so it will jump/dart around--that tho is easy to find--just jack up the front and take the wheel in your hands and turn it back and forth feeling for a bind, jerk, etc and then go to other side--to identify which side might be doing it you may need to unhook tie rods( you should see something as simple as a go kart with the spindle bolt thru the two ball bearings tightened a little too much)

  15. #15
    IC2
    IC2 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    UPSTATE New York
    Posts
    4,336

    Caster - does it to you every time (so can camber, but not quite so likely)

    Years ago I had a '68 Torino that I took it in for alignment - and the "mechanic" reversed the caster numbers from positive to negative(also screwed up the toe). When I complained that the car wouldn't drive in a straight line, that it was "squirrely" his response was that 'they all did it'. After having driven the car a good many miles and since new, assured him he was full of something very odorous. I went to another shop to get it fixed where that mechanic showed me what was wrong. That first mech - he was gone within a very short time afterwards.
    Dave W
    I am now gone from this forum for now - finally have pulled the plug

Reply To Thread
Page 1 of 5 1 2 3 4 5 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink