I've got a 39 Chevy I'm about to start on what would be the best.
weld in cross member or front clip.
Printable View
I've got a 39 Chevy I'm about to start on what would be the best.
weld in cross member or front clip.
weld in crossmember , heidts company , which is a mustang 2 style. the problem with a subframe is most are to wide to use and they are ugly .
Thanks Kennyd
well if ya dont want to cut the frame, the best would most likely be the M2 or any other bolt on or weld in front suspension & there's lots of companies that make them, BUT if ya want to clip it I would use a 68-70 style camaro subframe, there maybe others but I'll let you got through the list here ~~> http://www.chevytrucks.org/tech/ifs&rearend.htm ...joe
What kenny said!:toocool:
Quote:
Originally posted by kennyd
the problem with a subframe is most are to wide to use and they are ugly .
I will disagree w/this, cause i have seen lots of late 30's to the 50's with the camaro subframe i talked about & my own 40 chevy had had a camaro front suspension under it. not only did it ride great but ya couldnt tell where the subframe & stock frame were joined. just like anything else it has to be installed correctly or it will basicly worthless....joe
my comment was to look at the difference between m2 crossmembers and controll arms vs camaro and nova style.
also almost all nova camaro subs i have seen or delt with are too wide , so most pepole use weird offsets on wheels to make them work ! 1 in 100 work better than a m2 .
by the way , why so negative on the description?
as long as he uses the early nova/camaro suspensions he wont have a problem, because they are narrower the the later model onesQuote:
Originally posted by kennyd
also almost all nova camaro subs i have seen or delt with are too wide , so most pepole use weird offsets on wheels to make them work ! 1 in 100 work better than a m2 .
ya lost me here kenny, whatsa talk'n about....joeQuote:
by the way , why so negative on the description?
like you f,n care ? one you,ll never own ?
where's the love
I have a '72 Nova subframe in my '53 Studebaker. It was narrowed 3 inches to align with the Studebaker frame. All the welding is done very well and you have to look hard to find the grafts. Nice thing is all the front suspension parts are available over the counter. Ride and handling is very nice too. It aligns just fine without any problem. One down side is my turning circle is pretty big and the tires will touch the frame if you crank it over lock to lock.
Pat
Quote:
Originally posted by kennyd
like you f,n care ? one you,ll never own ?
where's the love
ooooo ya mean my location & the type rod I have....... well do ya care about where I live????? really, i put that up there on one of my BAD MOOD days (look i changed it"& as for the "one you,ll never own " well like it says, you'll never own it or one like it cause they are so few of them...... & where's the love, hell you tell me cause I aint getting any around here :CRY: :CRY: :whacked: :LOL: ....joe
thats funny , i like that .
whats the car ??? a 1966 bohemian super truxter ?
Poor Joe.............................is it time for another group hug??:p
Looks like we need to share a little extra info. Front track (gonna round most of the numbers here) for the MII is 56", for the early Camaro/Nova 60". Track on the '39 Chev was 56" for semi-elliptic axle, 57" for the knee action. I don't recall the later Chev chassis exactly, but I think the '41-48's were 59 or 60".
I've had both. My '39 Chev had an MII setup under it and the wheels cleared very well, they were pretty much centered under the fender. My '41 Chev had the Nova clip. I used a standard offset 6" wide wheel (3 1/8 back space I think), and it fit fine. Didn't sit back in the fender visually as much as the '39 with MII, but still plenty of clearance.
Here's how the '39 turned out.
And this was the '41.
look at how good the 39 fits the hole , bob ,very good looking 39
is that vitimin pee orange , ( roy d mercer )
kenny, thanks, the color was hugger orange with about a 100 ppm of white to soften it a little. Like I suspect you are, I value wheel placement, that's why we're building the '36 roadster around the specific set of wheels mounted on the mock up picture.
Quote:
Originally posted by kennyd
thats funny , i like that .
whats the car ??? a 1966 bohemian super truxter ?
nope it looks something like this....joe
http://bh2.htc.net/~clssy56/Joe/Joes1.jpg
yes , bob . i start every project with the wheels and stance first! i will not build a car for me or a coustomer without these being priority. i saw a photo of the 36 roadster , i dig it big time .