Does anyone know if a rearend out of a fox body mustang gt will work in a 1939 ford coupe with out modifying it? also if it does work whats the widest tire you can use
Printable View
Does anyone know if a rearend out of a fox body mustang gt will work in a 1939 ford coupe with out modifying it? also if it does work whats the widest tire you can use
The problem with these rear ends is all the bracketry welded on that would need to be removed to clean it up enough to swap in. Not impossible, just a lot of cutting and grinding to get the housing ready for whatever suspension setup you would be using.
Don
As Don said you will have to clean it up, but width wise its almost perfect, 59 inches I beleive, you should be able to get a eight inch rim under it with no problem with the correct offset.
cutting the brackets and griding is not a big deal. Just wanted to make sure i can get some decent size tires under there with out resplining the axel
Even if you find a posi four lug axle just get the 5 lug axles from a ranger pickup, they will bolt right in, or you can use the whole ranger axle assembly, its virtually the same, or another possibility, reading info.
http://www.therangerstation.com/tech...plorer8_8.html