Thread: tubular a arm spacers?
-
07-17-2009 06:26 PM #1
tubular a arm spacers?
Hello
I am changing my mmll front cross member and want to reuse my tubular a arms, but the spacers are welded to the old cross member. The old ones are thicker then any tubing that I have ever seen and I am wondering about how thick of dom tubing using gussets I can use if I can't find any that thick at my local metal supply? I have searched on line and all I see is a arm kits, but no parts. Has anyone else had to do this, and if so what did you use?
Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-17-2009 07:22 PM #2
Good idea, thanks. Yes it is the spacers for the wider tubular lower control arms that eleminate the need for strut rods
-
07-18-2009 05:54 PM #3
You should be able to find what you're looking for here, http://www.welderseries.com/
I've used them for various pieces and have been very satisfied. With the $$$ exchange rate, everything on their site is cheaper in US dollars and their shipping is fast. Talk to D.W.
Mike
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project