Thread: 4 link question?
Results 1 to 11 of 11
LinkBack URL
About LinkBacksThreaded View
-
07-28-2008 11:36 PM #2
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Well, those four bars you pictured are pretty short, too short IMO. If they were longer they would not pull the spring and axle any more forward than would a hairpin or wishbone rear setup. These rears only tend to travel up and down a few inches at most, so that arc doesn't impart too much pull on the axle. I also don't like the way he positioned the front of the bars way out on those spacers.
The ideal way for four bars to sit is parallel to the ground when sitting at ride height. You want to install them so they sit like that.
DonLast edited by Itoldyouso; 07-28-2008 at 11:38 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy