Quote Originally Posted by Don Meyer
I'll add wt. to the front as soon as I get several guys over. The spring rate is 350 lb/in. & as I recall the 4cyl springs are 300. I think the rate is close, but the springs might be too long. I've always had to cut the spring on these. With the lower A-arms level I'll have 4" of grd clearance at the front.

Well take care & your responses are always right on. What are you working on now?

Don
A little bit of everything, Don!!!! Hopefully can get things caught up by mid-summer and get back on the Ranchero. I've been accumulating parts for it for awhile now and just need to break down and part with the $$$$$$ necessary to get it sitting on all four and free up the chassis table for some new projects. The moly tubing I need for the roll cage and the rest of the chassis has gone up significantly in the last few months, and of course freight on it continues to increase. If I can get solid on a couple other projects I can put together a larger order and be able to save everybody a few bucks....