Thread: Front suspension help
Results 1 to 2 of 2
Threaded View
-
04-09-2007 02:11 PM #1
Front suspension help
I've just begun to build a 37 plymouth coupe. I plan to use a MII front end. My frame rails have a large hump over the the axle area. I can't understand how the crossmember would attach to the rails since they seem so high. On the phone Fatman said I do not need a frame stub but a year and a half ago they said I did need stub. looking for anyone who has some experience with this setup. Also I'll be using a GM 350 so I also need to consider motor mount position. Thanks
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit