Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
08-13-2006 07:57 PM #5
CHR Member
- Join Date
- Aug 2006
- Location
- Bryant
- Posts
- 30
Chaz, you can make your radius rods (hair-pins) with a flat plate to bolt to the top and bottom of the axle and grind the bottom with a flat stop to mount a plate for the four bolts to go thru. That plate can also house your lower shock mount an with the shock at an angle it will "dress" everything up. Then your bat wings just bolt on like the old springs.Last edited by squire; 08-13-2006 at 08:00 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy