Thread: Need shock location help?
Results 1 to 1 of 1
LinkBack URL
About LinkBacks-
06-19-2007 10:47 PM #1
CHR Member/Contributor
- Join Date
- Dec 2004
- Location
- TX
- Car Year, Make, Model: hotrod
- Posts
- 1,830
Need shock location help?
I have gas shocks in the front of the suburban and the front end is spongy and the I can feel the front tire bounce when I hit a bump. I have 22x10 with a 40 series tire and the burb has been lowered 5-7 . I am going to go with a stiffer shock to help but was looking at the angle of the shock, it looks like its leaning to much. I lowered the front with 2.5 dropped spindles and the rest was taken from the spring so the control arms(angles) only seen 2.5 inches difference. Whats is the correct angle for front shocks and should I move the shock out closer to the tire?Last edited by BigTruckDriver; 09-25-2007 at 07:22 PM.
Friends dont let friends drive fords!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project