Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Knee action Indipendent suspension
          
   
   

Reply To Thread
Results 1 to 10 of 10
  1. #1
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    Knee action Indipendent suspension

     



    I always read about late 30's cars having knee action front suspension, particuralrly GM cars, what is it exactly? I asked my teacher and he didn't know. I searched and found that knee action is a common name for dubonnet indipendent suspension. thanks in advance
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

  2. #2
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    The Dubonnet suspension is still used in a lot of farm equipment today. The axle is mounted rigidly to the frame. A support arm pivots on the kingpins to provide steering. The wheel strut is attached to the support arm with a spring or torsion bar to provide flex. This setup provides true vertical motion to the front wheel.
    Attached Images
    Jack

    Gone to Texas

  3. #3
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    thank you. I will print the picture and show it to my teacher, he was interested to find out what it was also.
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

  4. #4
    Big Tracks's Avatar
    Big Tracks is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    Keller
    Car Year, Make, Model: '79 Dodge Diplomat Coupe
    Posts
    832

    Find out what you can about a late 30's ('37 will do) Chevtolet "Master DeLuxe", Matt. They came with the duBonnet knee action front end.

    Jim

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Henry, could you explain the theory on knee-action shocks? I know what they are, but never did figure out how they work.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    timothale's Avatar
    timothale is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    castroville
    Car Year, Make, Model: 16 t buckethotrod 17 horsless carriaget
    Posts
    170

    I have knee action on a 36 pontiac, in theory you have less weight moving up and down so you get a better ride. According to my older brother the shocks didn't last very long on rough country roads and had to be rebuilt at about every 1o k mikes and it was expensive the suspension is similar to early VW Bug, Bug has 2 arms back to the spindle while GM Knee had one arm
    timothale

  7. #7
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i had a old timer say they filled them with stp? he may have been pulling on some thing? but they went bad alot .i have been told

  8. #8
    brianrupnow's Avatar
    brianrupnow is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Barrie-Ontario-Canada
    Car Year, Make, Model: 1931 Roadster Pickup
    Posts
    2,016

    The way a knee action shock worked----the shock was a cylindrical housing, with a vane that moved around the inside on a central shaft similar to a vacuum windshield wiper. There was a fixed divider wall in the cylindrical housing that ran from the center of the housing out to the side opposite of the vane. There was a small hole in the divider, and the cylindrical housing was filled with oil. As the vane rotated about the shaft, it forced the oil thru the small hole to the other side of the "divider". The resistance of the shock was established by what viscosity the oil was. The shaft was mounted to the cars frame, and had a lever on it. The lever was connected by a "link" to the cars front or rear axle. As the cars axle moved up and down on the springs, the lever rotated the shaft, which moved the vane, which moved the oil thru the orifice. Different weights of oil gave different ammounts of "firmness" to the shocks.---- There was also a type of knee action shock absorber that had a piston which moved back and forth in a cast iron cylinder to displace the oil thru an "orifice" the piston was moved back and forth by means of a rack and pinion, where the pinion shaft connected to a lever wheich was connected by a link to the cars axle. (that type of shock also mounted to the cars frame). I had a knee action 34 Chev car. The axle was mounted solid to the frame. Instead of a rotary housing and vane, there was a linkage which moved a large piston back and forth in a cylinder which was full of oil, and the piston moved the oil back and forth thru an orifice-----same kind of deal, only with it there was a honking big spring in the cylinder, on one side of the piston, which actually was the spring for the front wheel on that side. Apparently this type of suspension was very smooth, but after about 2 or 3 years time the seals would go and the oil would escape. The spring would still work allright, but with no oil being moved to control the rebound, it was just like driving a car with no shocks at all.----The reason that these shocks "worked better in theory" was that they were attached to the frame, thus giving less "unsprung weight" to the cars axle. The less "unsprung" weight an axle has, the less inertia it has to overcome in order to move, thus making it more "responsive" to changes in the road surface.
    Last edited by brianrupnow; 05-20-2006 at 05:20 AM.
    Old guy hot rodder

  9. #9
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Thank you Brian for the explanation. I had those on the front of my '36 and never really understood how they worked. I suspect that by the time I acquired the car the oil had leaked out which would explain why the car bounced so much on rough roads.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  10. #10
    TurboTwo is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2004
    Location
    Columbus
    Car Year, Make, Model: 31 Chevy Tudor Sedan
    Posts
    15

    if that picture had the names of the parts, mixed with Brian's explanation.. I may be able to 'see' it better

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink