Identification Spindle

There is a post titled " identify spindles Ford" I clicked on it and opened his webpage, and immediately got something that said "congratulations you have won something or other." I closed it out, and immediatelly, my computer locked up, and I had to reboot.

I alerted the moderator, and hopefully he will check it out right away. Maybe it's nothing, but he is brand new, and I have never seen a post with something being advertised like this. Better safe than sorry.

I'm not trying to be an alarmist, but something is wrong with this post. His profile shows nothing except "Hamburg"

Hope I didn't pick up a virus, and hopefully this will save someone else.

Thanks, Don

All you need is a pop-up blocker. It's just a photo.

I.m running popup blockers, anti virus tools, and ad-blockers. But I question why my computer locked up immediately, and also why is this new guy running promotions on his posts?

And the only info on his profile is HAMBURG.

Like I said, only trying to keep someone from getting burned. The internet is a very scarey place anymore. If it is nothing, ok, but he at least shouldn't be running promotions on his posts, agreed?

Don

Thanks guys. I just had never seen a pop up on someones post, and it scared the crap out of me, especially when the computer locked up.

Anyway, I think these are Ford truck spindles, circa 54-56. Look like the way they mount their arms.

Don

Please help me to identify my Spindles and Drum Brake, Brake Backing Plates.
And what fit´s it?
I am checking the flange diagrams on
http://www.stainlesssteelbrakes.com/...le_flanges.pdf
but i don´t find my front axle and spindle.

Kingpin is 0.74"" diameter
outer bearings A2 LM 11949, LM 11910
inner bearings A6 LM 67048, LM 67010

Hustler

I am so sorry for this confusion.
I think, my pictures are a little to big.
I am a rodder from germany, Hamburg.
I am member of the German Street Rod Association.
I have updatet my profil. Maybe, i´m a little respectablly?

DennyW, this link
http://www.clubhotrod.com/forums/sho...threadid=23086
is for me as invalid thread specified.

About my truble with picture upload,
i take it on my site:
http://www.rodcorner.de/HR_02/Spindle_5.jpg
http://www.rodcorner.de/HR_02/Spindle_A.jpg
http://www.rodcorner.de/HR_02/Spindle_B.jpg
http://www.rodcorner.de/HR_02/S2.jpg

Thank you,

Hustler

Thank You, DennyW,

i found numbers on the Brake Backing Plates.
WAGNER FF44448 and FF44447.

Hustler

I think, I it found.
The spindles and brakes are of the E100 61-63.
For the reconciliation of the different diameters of the King pin of .741" and King Pin axle bore of .813" were Bushings set into the axle.
Not necessarily the perfect compilation.

Hustler