Thread: Rear Axle Swap
-
12-20-2005 09:55 PM #1
Rear Axle Swap
I hope there is a "40 Plymouth fan out there that can tell me what is the best and easiest to install rear end to put in my 40 Plymouth P10 Sedan. I have a 350SBC and TH700R4 tranny that will go in it. My current measurement flange to flange is 56 inches.
Any info appreciated......
Frustrated
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-20-2005 11:06 PM #2
Here are some options;
http://www.teufert.net/other/rear%20...dimensions.htmYour Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
12-21-2005 05:03 AM #3
We put a '76 Camaro rear in our '40 Chrysler, and the tires are inside the fenders.
-
12-21-2005 04:55 PM #4
I have a 39 dodge, I used the engine transmission and 8 3/4 suregrip rearend in mine . The rearend fits perfectly.
-
12-21-2005 04:58 PM #5
I have a few pictures in my gallery.
-
12-21-2005 07:14 PM #6
Originally posted by Bob Parmenter
Here are some options;
http://www.teufert.net/other/rear%20...dimensions.htm
Sleezie
-
12-21-2005 09:47 PM #7
I have installed a 74 dodge van rear in a 41 Ply coupe worked well. Also the 8 " out of a granada would be close.Choose your battles well===If it dont go chrome it
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel