Thread: suspention
Hybrid View
-
08-09-2005 05:27 PM #1
suspention
hi im new here i am building a 49 hudson with a 350 chevy 8" ford rear i want to use mustang front but never have changed suspention before is this to much to try
-
08-09-2005 07:18 PM #2
Not really, you just need to pay attention and be careful. The MII stuff all hangs off the crossmember, so as long as you get the crossmember in there square and straight, it's a cake walk.
If you're gonna do it in your garage, read this paper I wrote on constructing a flat and level surface for cheap on which to start your project....
http://streetmachinesoftablerock.com...opic.php?t=425PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
08-10-2005 06:39 PM #3
thanks for the advise ill let you know how it goes
-
08-10-2005 06:57 PM #4
suspention
this is my 58 truck i like the way it looks low but it creates problems with sharp turns i was considering air ride but im not sure any suggestions would be greatly appreciated
Could it be a 10114182? If so, it is a Gen V 454, 4 bolt 1991 (or later). Hope that helps..
GM Engine de-coding