Alright guys, well here I am AGAIN to ask more questions... don't you guys just hate me now? Anyways I was talking to Kenny from AIM Industries about a dropped I Beam for my truck to lower the front end a measly little 3 inches since that is the most I can lower it unless I go with a IFS front end which I really can't afford. Anyways I saw they have the leaf spring flip kit, traction bars and 4 link set ups.
My questions for you guys are...
1.) What is better for my truck, the traction bars or 4 link?
2.) Is the leaf spring flip kit good or is it like lowering blocks where it's not so good on the suspension?
3.) If I get it lowered 3 in front and 2 in back then should I look for 2 inch dropped shocks because of travel or will stock height work?
4.) Since 4 link is a lot of money will traction help a lot?

Basically what I expect out of this truck once I am done with it (meaning it's reliable where I dont have to worry about it breaking down on me like I am worried now and have it handle great) is for it to handle very well and be good for my everyday street driving and be able to smoke the ricers of course and some mustangs too.
Right now my camber is off for some reason. There is too much postive camber in both front tires, one being worse than the other and you can tell just by glancing at the truck real fast. Also one of the front shocks is worn out big time, if you push down on it, it hops about 8-10 times so when I go around corners the front drops like crazy and when I straighten out it goes all over and hops and pulls like crazy. Then I have the rear end... Man oh man... don't stomp the gas, the back end just spins like crazy even when I don't try to make it spin... It either spins or hops because it grabs and then spins, grabs and spins...

So what I am trying to say here is that I wan't this thing to handle very good, it's my everyday driver not a drag truck. heh. It will see strip time though so don't worry... I got a honda with turbos on it wanting to race this year sometime.

I really appreciate any help here and am asking you guys because I don't want to buy something I really don't need and I am sure you guys have all gone through the best kind of learning which is trial and error but I don't have the money for that right now.
Thanks!